Need help?Do you have a question about the AMD Radeon HD 6950 and is the answer not in the manual?
General| GPU | Cayman Pro |
|---|---|
| Manufacturing Process | 40 nm |
| Stream Processors | 1408 |
| Texture Units | 88 |
| ROPs | 32 |
| Base Clock | 800 MHz |
| Memory Size | 2 GB |
| Memory Type | GDDR5 |
| Memory Bus Width | 256-bit |
| Memory Bandwidth | 160 GB/s |
| DirectX Support | 11 |
| Power Connectors | 2 x 6-pin |
| TDP | 200 W |
| Display Outputs | 2 x DVI, 1 x HDMI, 2 x Mini DisplayPort |
| CrossFire Support | Yes |
| Bus Interface | PCIe 2.1 x16 |
| Memory Clock | 1250 MHz |
Details hardware and software prerequisites for installation.
Lists prerequisites for setting up AMD CrossFireX.
Steps for replacing an already installed graphics card.
Detailed instructions for physically installing the graphics card.
Explains the role of drivers and essential software.
Guide to installing the Catalyst software suite on Windows.
Identifies and describes the display output connectors on the card.
Explains how to connect and use multiple displays.
Instructions for physically installing a second graphics card for CrossFireX.
Steps to enable and configure AMD CrossFireX using Catalyst Control Center.
General troubleshooting tips for graphics card installation.
Common issues and solutions related to installing the graphics card.
To Next Page