Chapter 6
Reference
This chapter provides notices, troubleshooting tips, and customer care, warranty, and
standards-compliance information.
6.1 Product Features
This chapter describes some of the special features that are associated with the AMD
FirePro™ W7000 product and are available through the Control Center software
application.
Note: Feature availability varies between AMD FirePro™ products and operating
systems.
6.1.1 Stereoscopic Glasses
Your AMD FirePro graphics card can enable quad-buffer stereo display, which is used
with special glasses to display images in 3D.
Quad buffering allows for smooth stereoscopic viewing under the following
conditions:
•
The Enable Quad Stereo option has been selected in the Control Center
application through the Workstation aspect.
Note: You must reboot your system after enabling quad buffering for the first
time.
•
An appropriate quad buffer stereo mode has been selected in the Control Center
application through the Workstation aspect.
Note: Refresh rates below 120 Hz will display noticeable “shutter” interference.
Because many LCD displays cannot achieve a sufficient refresh rate, CRT displays are
usually preferable.
6.1.1.1 Quad Buffer Stereo Modes
The following modes are available:
•
Active Sync (Sync Signal Enabled): Select this option for display devices
connected to the active synchronization connector on the graphics card. The
setting is selected by default.
•
Auto-Stereo (Vertical Interleaved): Select this option for auto-stereo display
devices that support vertically interleaved stereo image pairs.
©
2012 Advanced Micro Devices Inc. AMD FirePro™ W7000 Graphics Accelerator
To Next Page
Loading...
Need help?
General
