AMD Phenom II User Manual

PID:46878 Rev:3.04 - February 2009 Family 10h AMD Phenom™ II Processor Product Data Sheet
5
Family 10h AMD Phenom™ II Processor Features
• System Management Mode (SMM)
• ACPI-compliant, including support for processor performance states
• Supported power states: C0, C1, C1E, S0, S1, S3, S4, S5
• Electrical Interfaces
• DDR2 SDRAM: SSTL_1.8 per JEDEC specification
• DDR3 SDRAM: Compliant to JEDEC DDR3 1.5-V SDRAM specification
• Refer to the AMD Family 10h Processor Electrical Data Sheet, order# 40014, for electrical details of
AMD Family 10h processors.
• HyperTransport™ Technology to I/O Devices
• HyperTransport 1 and HyperTransport 3 technology supported
• One (1) link, 16-bits in each direction, supporting up to 2000 MT/s or 4.0 GB/s in each direction in
HyperTransport Generation 1.0 mode and 4400 MT/s or 8.8 GB/s in each direction in HyperTransport
Generation 3.0 mode.
• Integrated Memory Controller
• AMD Memory Optimizer Technology
• Low-latency, high-bandwidth
• Adaptive Prefetching Support
• ECC checking with double-bit detect and single-bit correct
• Supports up to four unbuffered DIMMs
• Package AM2r2
• 144-bit DDR2 SDRAM controller operating at frequencies up to 533 MHz
• Package AM3
• 144-bit DDR3 SDRAM controller operating at frequencies up to 667 MHz
• Available Packages
• Compliant with RoHS (EU Directive 2002/95/EC) with lead used only in small amounts in specifically
exempted applications
• Package AM2r2
• Refer to the AM2r2 Processor Functional Data Sheet, order# 41697, for functional and mechanical
details of the AM2r2 package processor.
• 940-pin lidded micro PGA
• 1.27-mm pin pitch
• 31 x 31 row pin array
• Organic C4 die attach
• Package AM3
• Refer to the AM3 Processor Functional Data Sheet, order# 40778, for functional and mechanical
details of the AM3 socket.
• 938-pin lidded micro PGA
• 1.27-mm pin pitch
• 31 x 31 row pin array
• Organic C4 die attach

AMD Phenom II Specifications

General

Architecture	K10
Process	45nm
Cores	2, 3, 4, 6
Socket	AM2+, AM3
Integrated Graphics	No
Base Clock	2.5 GHz - 3.7 GHz
L2 Cache	512 KB per core
L3 Cache	Up to 6 MB
TDP	65W to 140W
Memory Support	DDR2