To Next PageTo Next PageHow to fix an American Audio V3001 Plus Amplifier that doesn't turn on?
If your American Audio Amplifier isn't turning on, the problem might be a disruption in the main power connection. Check both the AC plug and the AC connection to ensure they are properly connected.
What to do if my American Audio V3001 Plus Amplifier makes a pop noise?
If your American Audio Amplifier is emitting a popping noise, the issue might stem from intermittent connections between the mixer or CD player and the amplifier. To resolve this, examine the cables and plugs to ensure their continuity.
General| THD | < 0.03% |
|---|---|
| Signal to Noise Ratio | > 100dB |
| Cooling | Variable speed fan |
| Power Output (2 ohms Stereo) | 1500W RMS per channel |
| Power Output (8 ohms Stereo) | 650W RMS per channel |
| Power Output (4 ohms Bridged) | 3000W RMS @ 4 Ohms 1kHz 1% THD |
| Power Output (8 ohms Bridged) | 2000W RMS @ 8 Ohms 1kHz 1% THD |
| Frequency Response | 20Hz - 20kHz (+/- 0.5dB) |
| Input Sensitivity | 0.775V |
| Input Impedance | 20k ohms (balanced), 10k ohms (unbalanced) |
| Protection | Thermal, short circuit, DC, overload |
| Power Output (4 ohms Stereo) | 1000W RMS per channel @ 4 Ohms 1kHz 1% THD |
