To Next PageTo Next Page
Need help?Do you have a question about the American Dryer Corp. ES76 and is the answer not in the manual?
Safety guidelines regarding flammable vapors and liquids.
Instructions on handling gas smell information and posting.
Emergency procedures to follow if a gas odor is detected.
Warnings against storing or using flammable materials near the appliance.
Information on potential fire hazards from lint, specific materials, and operation.
Technical details including capacity, dimensions, motors, and connections for gas, electric, and steam models.
Criteria for selecting an appropriate installation location, including clearances and environmental conditions.
Procedures for safely removing the dryer from packaging and preparing it for setup.
Specifications for the construction and ventilation of the dryer's enclosure.
Mandates for adequate make-up air to ensure proper dryer operation and prevent overheating.
Guidelines for designing and installing exhaust ductwork to prevent fire hazards and ensure efficient operation.
Methods to protect the exterior exhaust duct opening from weather elements.
Recommendations for ductwork runs and configurations for a single dryer.
Guidelines for connecting multiple dryers to a common exhaust duct system.
Details on voltage, phase, amp draw, and circuit breaker requirements for gas and steam models.
Specific electrical connection requirements for all-electric dryers.
Essential grounding procedures for safety and compliance with electrical codes.
Responsibilities for gas plumbing, materials, and conformity to codes.
Procedures and warnings for converting dryers between different gas types.
Technical data on gas input, orifice sizes, and burner pressure for various models.
Details on gas inlet connections and piping requirements for installers.
Steps for converting 60 Hz dryers from natural gas to propane or butane.
Steps for converting 50 Hz dryers from natural gas to propane or butane.
Procedures for testing gas pressure using a manometer to ensure correct operation.
Requirements and precautions for installing and operating steam dryers.
Specifications for operating steam pressure and consumption for high-pressure steam dryers.
Steps for ensuring adequate steam supply and preventing issues like water hammer.
Guidelines for water supply, connections, and the fire suppression system.
Checklist of items to verify before operating the dryer for the first time.
Procedure for testing the dryer before use to ensure proper factory settings and installation.
Specific start-up procedures for gas dryers, including purging air.
Operation of the microprocessor controller for coin and non-coin dryers.
Procedures for safely shutting down the dryer for periods of non-use.
Guidance on obtaining service, ordering replacement parts, and warranty procedures.
Instructions for completing and returning warranty cards.
Procedures for returning parts for warranty claims, including RMA process.
Detailed cleaning procedures for lint screens, chambers, and exhaust systems.
Tasks to be performed at 90 days, 6 months, and 12 months intervals.
Explanation of the information found on various data labels (Standard, CE, AGA).
Instructions for navigating the programming interface and accessing machine setup.
Accessing diagnostic functions to check faults and operational parameters.
General| Model Number | ES76 |
|---|---|
| Frequency | 60 Hz |
| Phase | 1 |
| Width | 9 7/8" (251 mm) |
| Depth | 4" (102 mm) |
| Height | 11 3/4" (298 mm) |
