American Panel Walk-in Monitoring System 100 - Change the Access Code

PROGRAMMING
10
Press , to skip.
The display will show:
Press , to skip.
Adjust the Air Probe Temperature Offset
The display will show:
Press or to match the flashing value with the temperature offset (T
OFFSET
) calculated in the
previous chapter (4.1).
The temperature reading at the temperature probe will automatically be changed by the temperature offset
entered.
When finished, press .
The display will show:
Press , to skip.
The display will show:
Press
, to skip.
The display will show:
Press , to skip.
The display will show:
Press , to skip.