American Standard 4A6C4036A4000A - User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and
air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered
equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the
literature and on the tags, stickers, and labels that are attached to the equipment.
November 2016
11-BC41D1-1A-EN
Split System Heat Pump
3–Phase, 230V
3–Phase, 460V
223300VV MMOODDEELLSS
4A6C4036A3000A
4A6C4042A3000A
4A6C4048A3000A
4A6C4060A3000A
446600VV MMOODDEELLSS
4A6C4036A4000A
4A6C4042A4000A
4A6C4048A4000A
4A6C4060A4000A
NNoottee:: “Graphics in this document are for representation
only. Actual model may differ in appearance.”
Installer’s Guide

Summary

Safety Section

Hazardous Voltage

Warning about risks associated with high voltage electrical components and proper safety procedures.

Refrigerant Oil

Caution regarding R-410A refrigerant and POE oil, emphasizing pressure and handling requirements.

Contains Refrigerant

Grounding Required

Unit Preparation

Refrigerant Line Considerations

Refrigerant Line Brazing

Refrigerant Line Leak Check

Refrigerant Line and Indoor Coil Evacuation

Electrical - Low Voltage

Electrical - High Voltage

System Charge Adjustment

Subcooling Charging in Cooling between 55° F and 120° OD Ambient

Charging the Unit

American Standard 4A6C4036A4000A Specifications

General

Model Number	4A6C4036A4000A
Category	Heat Pump
Brand	American Standard
Voltage	208/230V
Phase	1
Refrigerant Type	R-410A
Tonnage	3
Cooling Capacity	36000 BTU
Heating Capacity	36000 BTU
Compressor Type	Single-Stage