American Standard 4A7A6036J

To Next Page

11-AC36D1-7D-EN

ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES

IMPORTANT — This Document is customer property and is to remain with this unit. Please return to service informa-

tion pack upon completion of work.

These instructions do not cover all variations in systems or provide for every possible contingency to be met in connection with

the installation. Should further information be desired or should particular problems arise which are not covered sufficiently for the

purchaser’s purposes, the matter should be referred to your installing dealer or local distributor.

Note: The manufacturer recommends installing only approved matched indoor and outdoor systems. Some of the benefits of

installing approved matched indoor and outdoor split systems are maximum efficiency, optimum performance and the best overall

system reliability.

Installation and Operation Manual

Condensing Units

4A7A6018 – 061

Table of Contents

Section 1. Safety ..................................................................................... 2

Section 2. Unit Location Considerations ............................................. 3

Section 3. Unit Preparation.................................................................... 4

Section 4. Setting the Unit ..................................................................... 5

Section 5. Refrigerant Line Considerations ......................................... 5

Section 6. Refrigerant Line Routing ..................................................... 6

Section 7. Refrigerant Line Brazing ...................................................... 7

Section 8. Refrigerant Line Leak Check ............................................... 9

Section 9. Evacuation ............................................................................ 9

Section 10. Service Valves .................................................................. 10

Section 11. Electrical - Low Voltage ................................................... 10

Section 12. Electrical - High Voltage .................................................. 13

Section 13. Start Up.............................................................................. 14

Section 14. System Charge Adjustment............................................. 15

Section 15. Checkout Procedures ...................................................... 20

Section 16. Refrigeration Circuits........................................................20

Section 17. Wiring Diagrams................................................................23

Section 18. Pressure Curves................................................................37

Need help?

Do you have a question about the American Standard 4A7A6036J and is the answer not in the manual?

American Standard 4A7A6036J Specifications

General