American Standard BEALE MeasureFill User Manual

Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
1
M965857 (11/17)
(A) Installation on 1-hole mounting surface:
• Make certain the SEAL (2) is properly seated in bottom recess of MOUNTING RING (10) and in top recess of MOUNTING
RING (10). Place mounting ring over mounting hole at the deck. Insert CABLES (12), HOSES (3) and SHANK (4) through
mounting ring and deck, seat SPOUT BASE onto sink or mounting surface. Do not use putty.
• From below: Insert CABLES (12) and HOSES (3) through PLASTIC WASHER (6), BRASS WASHER (7), and threaded
LOCKNUT (8).
• Assemble PLASTIC WASHER (6), BRASS WASHER (7), and threaded LOCKNUT (8) onto SHANK (5) from underside
of sink or mounting surface. Hand tighten LOCKNUT (8).
• Make sure faucet is aligned properly with handle on the right and logo facing directly forward.
• Use a screwdriver to tighten SCREWS (9) on LOCKNUT (8). Work your way around LOCKNUT (8), tightening the screws
slightly each time until all are snug to ensure even pressure.
(B) Optional: Installation on 3-hole mounting surface: Requires Deck Escutcheon - order separately
• Make certain the FOAM SEAL (14) is properly seated in bottom recess of DECK ESCUTCHEON (1). Do not use putty.
• Place deck escutcheon over mounting holes of the deck.
• Insert SUPPLY CABLES (12), HOSES (3), SPRAY HOSE (4) and SHANK (5) through hole of DECK ESCUTCHEON (1) and
mounting surface.
• Follow mounting instructions above to secure faucet to mounting surface.
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
BEALE
®
MeasureFill
™
KITCHEN FAUCET
INSTALLATION
INSTRUCTIONS
4931360
Flat Blade Screwdriver Adjustable WrenchPhillips Screwdriver
Certied to comply with ANSI A112.18.1M
3
1
14
5
15
B (OPTIONAL)
A
SPOUT BASE
SINK OR
MOUNTING
SURFACE
SPOUT BASE
2
12
10
5
3
6
9
7
4
8
6
9
7
4
8
CAUTION
Turn off water at
main supply
- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
10
2

American Standard BEALE MeasureFill Specifications

General

Brand	American Standard
Model	BEALE MeasureFill
Category	Kitchen & Bath Fixtures
Handle Style	Lever
Flow Rate	1.5 GPM
Material	Brass
Finish	Chrome
Valve Type	Ceramic Disc
Spray Functions	Stream, Spray
Measure Fill Technology	Yes
Number of Handles	Single
Spout Height	8.5 inches

Summary

Install Faucet with or without Deck Escutcheon

Install Faucet on 1-Hole Surface

Steps for installing the faucet on a single-hole mounting surface, focusing on seal placement and secure tightening.

Install Faucet on 3-Hole Surface (Optional)

Guidance for using a deck escutcheon for three-hole mounting, including seal placement and securing the faucet.

Install Control Box and Connections

Secure Control Box Mounting

Instructions for mounting the control box on walls, specifying hole spacing and using anchors for drywall or tile.

Connect Spray Hose and Install Weight

Connecting the spray hose, installing the weight on the hose, and connecting flexible supply hoses to water sources.

Secure Electrical Connections

Attaching cable mounts and hook-to-loop fasteners for securing battery holder and cables inside kitchen cabinets.

Faucet Functionality and Operation

Measured Fill Functionality

How to dispense a measured amount of water by touching the induction window; light indicates process.

Continuous Flow Functionality

Methods to activate continuous water flow, either manually via handle or sensor activation by touching the knob.

Spray, Service, and Care

Spray Operation Mode

How to switch between stream and spray modes using the toggle button on the spray head.

Faucet Service and Troubleshooting

Guidance on battery replacement indicators and troubleshooting reduced or distorted water flow by cleaning components.

Faucet Care Instructions

Recommended cleaning methods using clear water and soft cloth, and prohibited cleaning agents.