- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
1
INSTALL SPOUT
STUDIO
®
S
DECK MOUNT BATH FILLER
INSTALLATION
INSTRUCTIONS
T105900
T105901
Certied to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before begining.
M965957 (7/18)
12" MIN.
(305 mm)
1" MAX.
(25 mm)
4-5/8"
(118 mm)
2-1/2"
(64 mm)
2-15/16"
(74 mm)
4-3/4"
(120 mm)
5-11/16"
(145 mm)
7-13/16"
(199 mm)
9-7/16"
(240 mm)
12"
(306 mm)
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
Hex wench
(supplied)
RECESS
1
3
2
MOUNTING
SURFACE
4
3
• Thread DIVERTER INSERT (5) carefullyit touches the
installation surface, be sure the RUBBER RING (4)
is properly seated in it’s RECESS at the base of the
SPOUT (1).
• Thread SET SCREW (3) using 5 mm hex wrench supplied.
Make certain SET SCREW (3) is properly aligned and tight
so that SPOUT (1) is locked in place.
• Install PLUG BUTTON (2).
To Next Page
Need help?
General
