American Standard Ravenna 0044.000 User Manual

J60
Revised
© 2008 AS America Inc.
RAVENNA™
SEMI-PEDESTAL SINK
VITREOUS CHINA
RAVENNA™ WALL-HUNG
SEMI-PEDESTAL LAVATORY
• Vitreous china
• Contemporary design wall-hung with
semi-pedestal P-trap cover for ease of cleaning
• Rear overow
• Soap and accessory deck
• Optional with integral mounted towel bar
(ordered separately)
• Supplied with mounting kit
• Design matched to Ravenna toilets
(faucet shown not included)
• Faucet ledge with generous shelf area
for accessories
❏ 0268.444 Faucet holes on 4" (102mm) centers
(shown)
❏ 0268.888 Faucet holes on 8" (203mm) centers
❏ 0268.144 Center hole only
Nominal Dimensions:
24-1/4" x 19-1/2" x 34"
(616 x 495 x 864mm)
Separate Components:
❏ 0268.004 Lavatory slab 4" (102mm) centers
❏ 0268.008 Lavatory slab 8" (203mm) centers
❏ 0268.001 Lavatory slab center hole only
❏ 0044.000 Semi-pedestal leg
Recommended Components:
❏ 3520.000 Integral Towel Bar
002 Chrome, 295 Satin Nickel
❏ 738520-0070A Towel Bar mounting kit
Bowl sizes:
19" (483mm) wide
12" (305mm) front to back
6" (152mm) deep
Compliance Certications:
Meets or exceeds the following specications:
• ASME A112.19.2 for vitreous china xtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
* See faucet section for additional models available
24-1/4"
(616mm)
9-1/2"
(241mm)
2"
(51mm)
7/8" (22mm) DIA.
SLAB ANCHOR
SCREW HOLES ON
9-1/2" (241mm) CTRS
34"
(864mm)
14-3/8"
(365mm)
5"
(127mm)
19-1/2"
(495mm)
3-1/4"
(83mm)
7-3/4"
(197mm)
1/2" (13mm) DIA.
SEMI-PED ANCHOR
SCREW HOLES ON
4-1/4" (108mm) CTRS
*21"
(533mm)
2-3/4"
(70mm)
1-1/4" O.D.
WASTE
SUPPLIES AS
REQUIRED
1-1/4" O.D.
TAILPIECE
8-1/4"
(210mm)
FINISHED
FLOOR
FINISHED
WALL
20"
(508mm)
4"
(102mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
SEMI-PED
BASE
TOWEL
RAIL
*24-3/4"
(629mm)
Revised 5/06

American Standard Ravenna 0044.000 Specifications

General

Product Type	Toilet
Color	White
Depth	29.75 inches
Flush Type	Gravity Fed
Water Consumption	1.6 GPF
Collection	Ravenna
Model Number	0044.000
Bowl Shape	Elongated
Gallons Per Flush	1.6
Material	Vitreous China
Rough-In Size	12 inches
Flush Valve Size	2 inches
Trap Size	2 inches
ADA Compliant	Yes
Warranty	Limited Lifetime

Summary

Ravenna Wall-Hung Semi-Pedestal Lavatory

Product Features

Key features include vitreous china construction, contemporary design, rear overflow, soap deck, optional towel bar, and faucet ledge.

Faucet Hole Configurations

Options for faucet hole spacing: 4" (102mm) centers, 8" (203mm) centers, or center hole only.

Nominal Dimensions and Bowl Sizes

Overall dimensions are 24-1/4" x 19-1/2" x 34". Bowl sizes are 19" wide, 12" front to back, and 6" deep.

Components and Recommendations

Separate Components

List of individual components like lavatory slabs with different hole configurations and semi-pedestal legs.

Recommended Components

Suggested accompanying items, including integral towel bars and towel bar mounting kits.

Compliance and Installation Notes

Compliance Certifications

Meets or exceeds ASME A112.19.2 standards for vitreous china fixtures.

Installation and Specification Notes

Details on suggested dimensions, anchoring requirements, and that fittings are ordered separately.