Need help?Do you have a question about the American Standard Tropic 7038.201 and is the answer not in the manual?
General| Product Type | Toilet |
|---|---|
| Bowl Shape | Elongated |
| Gallons Per Flush | 1.6 |
| Material | Vitreous China |
| Bowl Height | 16.5 inches |
| Flush Valve Size | 2 inches |
| Rough-In Size | 12 inches |
| Trap Size | 2 inches |
| Color | White |
| Flush Type | Gravity |
Turn off water, then insert faucet and cable connector through sink holes.
Remove drain covers, tighten tailpiece, and prepare drain body with gasket and locknut.
Insert drain body, ensure correct orientation, and tighten the locknut firmly.
Verify gasket compression and ensure the pop-up knob is in the down position.
Thread the cable connector onto the drain body connection securely.
Operate the lift knob to confirm the drain stopper opens and closes correctly.
Connect flexible water supplies to faucet and drain tailpiece to waste outlet.
Turn on water, flush lines, and inspect all connections for any signs of leakage.
Fill the sink to check the drain stopper's seal and inspect drain connections for leaks.
Instructions for changing handle direction and performing basic service.
Guidelines for cleaning the faucet using only clear water and a soft cloth.
Adjust the drain cable to ensure proper stopper operation and sink drainage.
Step-by-step guide to detach and remove the drain stopper from the assembly.
Install the stopper in Locked Mode for a non-removable configuration.
Install the stopper in Unlocked Mode for easy removal.
To Next Page