To Next PageTo Next Page
Need help?Do you have a question about the American Standard ULN100-199 and is the answer not in the manual?
General| Brand | American Standard |
|---|---|
| Model | ULN100-199 |
| Category | Water Heater |
| Language | English |
Choose a location accessible to utilities, near usage, and protected from freezing.
Details clearances from combustible materials and specific flooring installation rules.
Guidelines for installing the draft hood and flue damper, including venting.
Details on proper venting and flue gas removal.
Proper installation and securing of the draft diverter.
Guidelines for connecting vent pipes to the chimney or approved venting system.
Guidelines for vent pipe diameter, slope, and connections to the chimney.
Addresses how exhaust fans and fireplaces can impact venting performance.
Specifies requirements for air supply drawn directly or via ducts from outdoors.
Details for connecting hot and cold water supply lines to the water heater.
Connect hot and cold water supply lines, noting dip tube and shut-off valve placement.
Guidelines for gas piping material, shut-off valves, drip legs, and pipe dope.
Guidelines for gas piping material, shut-off valves, drip legs, and pipe dope.
Details required clearances for vent and air supply terminals based on location.
Details required clearances for vent and air supply terminals based on location.
Details air supply needs for combustion and ventilation based on location and space volume.
Details requirements for drawing combustion and ventilation air from inside the building.
General safety precautions for water heater installation.
Specific safety precautions for installations using Liquefied Petroleum (L.P.) gas.
Details requirements and operation of the T&P relief valve.
Details mandatory requirements for the relief valve discharge line installation.
Instructions for manual operation and warnings related to valve discharge and thermal expansion.
Specifies electrical requirements, grounding, and caution for wiring errors.
Specifies electrical requirements, grounding, and caution for wiring errors.
Step-by-step guide to filling the water heater tank with water before operation.
Step-by-step guide to filling the water heater tank with water before operation.
A comprehensive checklist for verifying correct installation steps.
Verifies correct placement and clearances for the water heater unit.
Ensures proper water connections and tank filling.
Confirms correct installation and discharge line for the T&P relief valve.
Verifies correct gas type, connections, and leak checks.
Diagnoses common issues and provides remedies.
Key safety checks and warnings before operating the water heater.
Critical steps to take if gas is detected, including immediate actions.
