Need help?Do you have a question about the American Standard YSC036A and is the answer not in the manual?
General| Model | YSC036A |
|---|---|
| Refrigerant | R-410A |
| Voltage | 208/230V |
| Phase | 1 |
| Cooling Capacity | 36000 BTU/h |
| Tonnage | 3 tons |
| SEER | 16 |
Defines safety alert symbols (Warning, Caution).
Procedures for inspecting the unit upon arrival for damage.
Guidelines for storing the unit to prevent condensate formation.
Alerts on refrigerant, hazardous voltage, and capacitor risks during handling.
Warnings regarding R410a refrigerant, UV lights, and potential roof damage.
Details on unit nameplate, compressor, description, and factory testing.
Overview of Electro Mechanical, ReliaTel, RTCI, RLCI, and RTOM control systems.
Explains Economizer Actuators and various sensors like Zone, Humidity, and High Temp.
Specifies required clearances and provides dimensional drawings for unit installation.
Safety precautions and measures for handling fiberglass insulation.
Guidelines for safely lifting and rigging heavy unit components.
Procedures for preparing the installation site and installing roof curbs.
Instructions for connecting ductwork, gas piping, and electrical services.
Guidelines for safe power supply wiring and connecting 24VAC/DC controls.
Essential checks before initial unit operation, including voltage and component verification.
Guides for performing system tests to verify component operation and air flow.
Procedures for starting compressors, economizers, and other components.
Steps for programming, final checks, and gas heat unit start-up.
Instructions for adjusting and maintaining fan belt tension on belt drive units.
Routine checks and cleaning tasks for optimal unit performance, including filters.
Specific checks for cooling and heating seasons, and coil cleaning procedures.
Using RTRM and LED indicators for system status and failure diagnosis.
Procedures for checking system status via LED indicators and voltage measurements.
Steps for diagnosing failures like heating/cooling, lockouts, sensors, and switches.
Diagnosing and testing the economizer actuator and its associated sensors.
Details the warranty terms for residential applications of the unit.
Details the warranty terms for commercial applications of the unit.
To Next Page