AMES 57013 - Area - Triangle; Area - Trapezoid

Page 10 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57013
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
F(*,%?%G(",837*%
1. Press ULEG%button to turn Meter on.
2. Set Laser Reference Point.
3. Press until appears.
4. Press ULEG%button to activate laser.
5. White measurement - Place Meter in
corner of first angle, pointing to corner
of second angle, then press ULEG%
button to take first measurement.
6. Place Meter in corner of second
angle, pointing to corner of third
angle, then press ULEG%button to
take second measurement.
7. Place Meter in corner of third
angle, pointing to corner of first
angle, then press ULEG%button
to take third measurement.
8. Yellow measurement - Area.
F(*,%?%G(,/*_&"9
1. Press ULEG%button to turn Meter on.
2. Set Laser Reference Point.
3. Press until appears.
4. Press ULEG%button to activate laser.
5. White measurement - Place Meter
against first surface, pointing at
opposite surface, then press ULEG%
button to take first measurement.
6. Pink measurement - Place Meter
against second surface, pointing at
opposite surface, then press ULEG%
button to take second measurement.
7. Blue measurement - Place Meter
against third surface, pointing
opposite surface, then press ULEG%
button to take third measurement.
8. Yellow measurement - Area.