33050-OLV Division 2 Sample System
SPECIAL WARNINGS AND INFORMATION FOR USE OF THIS
EQUIPMENTC IN CLASS I, DIVISION 2 HAZARDOUS LOCATIONS
This Equipment is designed to meet the requirements for: Class I, Division 2,
Groups ABCD, T4 or Non-Hazardous Areas Only.
—————————————————————————————————————
Warning - Explosion Hazard - Substitution of Components May Impair Suitability
for Class I, Division 2.
AVERTISSEMENT - RISQUE D’EXPLOSION - LA SUBSTITUTION DE COM-
POSANTS PEUT RENDRE CE MATERIAL INACCEPTABLE POUR LES EMPLACE-
MENTS DE CLASSE I, DIVISION 2.
—————————————————————————————————————
Warning - Explosion Hazard - Do Not Disconnect Equipment Unless Power Has
Been Switched Off or the Area is Known to be Non-Hazardous
AVERTISSEMENT - RISQUE D’EXPLOSION - AVANT DE DECONNECTER
L’EQUIPEMENT, COUPER LE COURANT OU S’ASSURER QUE L’EMPLACMENT
EST DESIGNE NON DANGEREUX.
—————————————————————————————————————
All Input and Output Wiring Must be in Accordance with Class I, Division 2 Wir-
ing Methods and in Accordance With the Authority Having Jurisdiction.
To Next Page
Loading...
