Ametek JOFRA CTC-140 A User Manual

123199 04 7
The humidity in the air may cause corrosion oxidation
on the insertion tube inside the instrument. There is a
risk that the insertion tube may get stuck if this is
allowed to happen.
 If the calibrator is to be transported, the insertion tube
must be removed from the well to avoid damage to the
instrument. If the insertion tube is not removed from the
CTC-1200 A the ceramic well might crack.
Note…
The product liability only applies if the instrument is
subject to a manufacturing defect. This liability becomes
void if the user fails to follow the instructions set out in this
manual or uses unauthorised spare parts.

Ametek JOFRA CTC-140 A Specifications

General

Brand	Ametek
Model	JOFRA CTC-140 A
Category	Measuring Instruments
Language	English