Ametek JOFRA ITC-155 A Reference Manual

50 17-08-2004 123312 03
If the new coefficients deviate by more than 4% from the
standard values, the instrument will display an ERROR 2 in
the display. The calculated coefficients will be ignored:

Press
to repeat the entire calibration/adjustment
procedure.

Press
when Cont. is flashing to end the
calibration/adjustment procedure and enter a new calibration
date (see section 8.2.1).

Ametek JOFRA ITC-155 A Specifications

General

Brand	Ametek
Model	JOFRA ITC-155 A
Category	Measuring Instruments
Language	English