Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 165
Figure 5-105. PONS Voltage Settings
PONS MODE PONS menu: Selects the mode of operation for the output
voltage of the power source: either AC only, DC only, or AC with
a DC offset, AC+DC; the default is AC.
Figure 5-106. PONS Mode Settings
PONS RANGE PONS menu: Selects the output voltage range, either low-range,
166 VAC or 220 VDC, or high range, 333 VAC or 440 VDC. The
available ranges are dependent on the selection of the PONS
mode, either AC, DC, or AC+DC; the default is low-range, 166
VAC.
Figure 5-107. PONS Range Settings
To Next Page
Loading...
