Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 179
Figure 5-135. Current Surge/Sag Settings
DELAY Sets the time duration, in seconds or cycles, that the current and
frequency will stay at their existing levels before the next transient
event is executed or the transient list is complete.
Figure 5-136. Current Delay Settings
5.8.6.3 CURRENT DROP Sub-Menu
The Current DROP menu allows programming the output current to zero at the maximum slew rate. After
the drop time duration, the current returns to the previous level. When the transient definition is complete,
tap SAVE to store the transient step settings in non-volatile memory and return to the ADD menu.
Figure 5-137. LIST Menu, CURRENT DROP Sub-Menu
To Next Page
Loading...
