Sequoia / Tahoe Series User Manual California Instruments
194 M447352-01 REV-A
5.9 HOME Screen Top-Level Menu - (eLoad Power Programming Mode)
5.9.1 Banner Screen
Figure 5-166. Banner Screen for eLoad – Power Programming
5.9.2 HOME Screen
Figure 5-167: HOME Screen for eLoad – Power Programming Mode
5.9.3 Dashboard Screen Top-Level Menu
The DASHBOARD screen top-level menu is used to change output parameters and simultaneously view
output measurements. The most commonly used output parameters are located in the DASHBOARD
screen menu. The DASHBOARD screen is the default menu that is displayed after powering on.
The top-level menu of the DASHBOARD screen is shown in Figure 5-168. It can be reached in one of two
ways:
1. Tapping DASHBOARD on the HOME Screen of the front panel touch-screen.
2. Scrolling to DASHBOARD with the encoder and depressing the encoder switch.
To Next Page
Loading...
