Sequoia / Tahoe Series User Manual California Instruments
196 M447352-01 REV-A
SYNCHRONIZE Starts the Synchronization between Sequoia and EUT. Once the
Synchronization is successful it will display “SYNCED”.
Measure
VOLTAGE Displays the true RMS value of the output voltage measured at
the voltage sense lines. In DC-mode only, the voltage is the DC
voltage including polarity.
CURRENT Displays the true RMS value of the output current. In DC mode
only, the current is the DC current including polarity.
FREQUENCY When in AC mode, the output frequency is measured at the
sense lines. When in DC mode, this value always reads “DC”.
5.9.4 Real-Time Parameter Adjustment
The DASHBOARD screen menu provides the capability for output parameter entry that has a real-time,
immediate effect on the output. This allows manual adjustment of the output parameters where the tuning
of a value is desired. Enabling this function requires tapping on a parameter selection-field box with the
encoder switch to select the parameter and display its selection-field highlighted and with a value entry
window. The rotary encoder could then be used to continuously adjust the parameter value, up and down,
as it is rotated. The value change takes immediate effect on the output.
Figure 5-169. Real-Time, Immediate Output Parameter Adjustment
5.9.5 Output Program Screen
The OUTPUT PROGRAM screen provides the setting of output-related items such as individual output
parameters, mode of regulation and current limit, output waveform selection, and display of real-time output
waveform or harmonics spectrum.
The top-level menus of the OUTPUT PROGRAM screen are shown in Figure 5-170. They could be
reached in one of two ways:
1. Tapping the OUTPUT PROGRAM screen on the HOME Screen of the front panel touch-screen.
2. Scrolling to the OUTPUT PROGRAM screen with the encoder and depressing the encoder switch.
The UP arrow button will return to the previously selected screen menu (in this case the HOME Screen).
The HOME button will return to the HOME screen that has the top-level menu for the sub-menu being
displayed; for the OUTPUT PROGRAM screen top-level menu, is the HOME Screen.
To Next Page
Loading...
