Sequoia / Tahoe Series User Manual California Instruments
216 M447352-01 REV-A
Figure 5-208. ALC Settings
PROFILES Selects the operational state of the power source; the default is
Profile-0. Up to 15 unique profiles, including transient lists, could
be stored; Subsequently, a profile could be loaded to
automatically set the unit to that configuration. To save the
present state, tap on the profile selection button. The profile could
be given an alphanumeric identifier by using the Name function;
Tap the SAVE field to store the present configuration. Tap on the
Load field to recall a configuration and set the power source to
that state.
Figure 5-209. CONFIGURATION Menu, PROFILES Sub-Menu
To Next Page
Loading...
