Sequoia / Tahoe Series User Manual California Instruments
222 M447352-01 REV-A
Figure 5-223. MEASUREMENTS Screen Top-Level Menu
The following functions are available in the menus of the MEASUREMENTS screen:
Entry Description
VOLTAGE Displays the true RMS value of the output voltage measured at
the voltage sense lines (user selectable to be local or remote). In
DC-mode only, the voltage is the DC voltage including polarity.
Figure 5-224. Voltage Measurements
FREQUENCY When in AC-mode or (AC+DC)-mode, displays the output
frequency. In the DC mode, this value always reads “DC”.
Figure 5-225. Frequency Measurements
To Next Page
Loading...
