Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 223
POWER Displays the true power, kW, and apparent power, kVA, of the
load.
Figure 5-226. Power Measurements – Source, Grid Simulator,
eLoad – RMS Current and eLoad RLC Programming Mode
Figure 5-227. Power Measurements – eLoad – Power
Programming Mode
CURRENT When in AC-mode or (AC+DC)-mode, displays the RMS output
current. In the DC mode, displays the DC including polarity. The
Peak Current displayed is the maximum instantaneous value that
has been detected. The Reset function allows resetting the peak
value to zero and restarting current tracking. The peak current
measurement will continuously track the maximum current value
detected until reset.
To Next Page
Loading...
