Sequoia / Tahoe Series User Manual California Instruments
224 M447352-01 REV-A
Figure 5-228. Current Measurements
PHASE Displays the phase angle of the output of the power source: in a
standalone unit, the phase angle would be with respect to the
external SYNC signal; in an auxiliary unit (with LKS option) of a
multi-phase group, the phase angle would be between the
Auxiliary output and the Leader output. If the clock source is
selected to be internal, this parameter is not used.
Figure 5-229. Phase Measurements
POWER FACTOR Displays the power factor of the load.
Figure 5-230. Power Factor Measurements
CREST FACTOR Displays the crest factor of the output current as the ratio of its
peak value to its RMS value.
To Next Page
Loading...
