Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 233
LAN Configures the LAN (Ethernet) communications interface. After
settings are changed, the unit must be turned off/on for them to
take effect.
Figure 5-244. CONTROL INTERFACE, LAN Menu
The following sub-menus are available in the LAN menu:
Entry Description
LAN SETTINGS Lists the configuration settings of the LAN interface, and the
DNS-SD service name; a number, (n), would be appended to the
service name, if necessary, to differentiate duplicate power
source names.
Figure 5-245. LAN Settings
LAN CONFIGURE Sets parameter values and controls the operation of the LAN
interface.
To Next Page
Loading...
