Sequoia / Tahoe Series User Manual California Instruments
238 M447352-01 REV-A
1. Tapping SYSTEM SETTINGS on the HOME Screen of the front panel touch-screen.
2. Scrolling to SYSTEM SETTINGS with the encoder and depressing the encoder switch.
The UP arrow button will return to the previously selected screen menu (in this case the HOME Screen).
The HOME button will return to the HOME screen that has the top-level menu for the sub-menu being
displayed; for the SYSTEM SETTINGS screen top-level menu, is the HOME Screen.
Figure 5-257. SYSTEM SETTINGS Screen
The following sub-menus are available in the SYSTEM SETTINGS menu:
Entry Description
FIRMWARE VERSION Displays information about the configuration of the power source.
It has information such as manufacturer, model number, serial
number, and firmware version. This information helps identify the
unit and options installed.
Figure 5-258. Model and Firmware Version for TAHOE
Series
To Next Page
Loading...
