Sequoia / Tahoe Series User Manual California Instruments
256 M447352-01 REV-A
Figure 8-4: Transients Screen Top-Level Menu
Figure 8-5: Transients Settings Screen
2. Tap on the TRIGGER sub-menu; refer to Figure 8-6. Set the parameter values as follows:
Phase Sync: All
Trig Out Source: BOT
Start Source: Immediate
Figure 8-6: Settings Screen – Trigger Sub-Menu
3. Navigate to the List menu of the TRANSIENTS screen; refer to Figure 8-4 and Figure 8-7.
To Next Page
Loading...
