Ametek SEQUOIA Series - Page 280

Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 257
Figure 8-7: List Menu with Empty Buffer
4. Tap the ADD field to enter the ADD sub-menu; refer to Figure 8-8 and Figure 8-9.
Figure 8-8: AC Mode Transients Type Selection for
Source and Grid-Simulator Operating
Modes
Figure 8-9: DC Mode Transients Type Selection for
Source and Grid-Simulator Operating
Modes
5. Tap the VOLTAGE SURGE/SAG selection button, refer to Figure 8-8 and Figure 8-10. Enter the
following parameter values:
T(ime): 0.083 sec; the value is entered as seconds, with a minimum time resolution of 0.001 sec;
V(olts): 160 V; the surge voltage value;