Ametek SEQUOIA Series - Mechanical Specifications

Sequoia / Tahoe Series User Manual California Instruments
30 M447352-01 REV-A
Relative Humidity
0-95 % RAH, non-condensing maximum for temperatures up to 31C
decreasing linearly to 50% at 40C.
Vibration Designed to meet ISTA 1B transportation levels.
Shock Designed to meet ISTA 1B transportation levels.
Transportation integrity ISTA Test Procedure 1B
2.28 Regulatory Agency Compliance
Parameter Specification
EMC
CE marked for EMC Directive 2014/30/EU per EN 61326-1:2013 Class A for
Emissions and Industrial Immunity levels as required.
Safety
CE marked for LVD compliance 2014/35/EU to EN 61010-1:2010+A1:2019 as
required for the EU CE mark.
CE Mark LVD Categories Installation Overvoltage Category: ΙΙ; Pollution Degree: 2; indoor use only.
RoHS
CE marked for compliance with RoHS3 EU Directive 2015/863/EU for Restriction
of Hazardous Substances in Electrical and Electronic Equipment.
2.29 Mechanical Specifications
Parameter Specification
Dimensions
For SQ0022 & TA0022,
SQ0030 & TA0030, SQ0045
& TA0045
Height: 45.3” 1150 mm
Width: 28.4” 722 mm
Depth: 33.8” 858 mm
Unit Weight SQ0022 &
TA0022, SQ0030 & TA0030,
SQ0045 & TA0045
1016lbs/ 461kg
Unit Weight SQ0090 &
TA0090
TBD
Shipping Weight SQ0022 &
TA0022, SQ0030 & TA0030,
SQ0045 & TA0045
1378lbs/ 629kg
Shipping Weight SQ0090 &
TA0090
TBD
Material Steel chassis with aluminum panels and covers.
Finish Light textured painted external surfaces.
Black Semi Glossy finish
Acoustic Noise
65 dBA maximum at 0% to 50% load, 75 dBA maximum greater than 50% load
to 100% load. Measured at one meter.
Cooling Fan cooled with air intake on the front and exhaust to the rear.
Fans: 6 x 225CFM.
Air displacement 22 Cu Ft/sec. Max.
Internal Construction Modular sub-assemblies