Ametek Spectro MIDEX - Overview

Description of instrument
SPECTRO MIDEX
— 05.10.2017 —
5
1.3 Overview
The instrument is designed for a measurement distance of 5 mm. A scissor lift
table is used to adjust the sample to be measured to the correct distance.
The instrument is available with various stop configurations:
 Preset stop
 Software-controlled selectable stop
Fig. 1
No. Component No. Component
1 PC 6 Rear side
2 Instrument a Key switch with removable key
3 Sample chamber with scissor lift
table
b Fuse
4 Sample chamber lid c Power supply connection point
5 X-ray radiation indicator d Video connection point (USB)
e PC connection point (LAN)