UPS + Isolation Transformer User Manual
© 2020 AMETEK Electronic Systems Protection | Technical Support: 1-800-645-9721 | surgex.com 1
DAN
GE
R
CAU
TIO
N
WARNING
A
TTE
N
TIO
N
Danger- The danger symbol is used to indicate imminently
hazardous situations, locations, and conditions which, if not
avoided, WILL result in death, serious injury, and/or severe
property damage.
Caution- The caution symbol is used to indicate
potentially hazardous situations and conditions which, if
not avoided, may result in injury. Equipment damage
may also occur.
Warning- The warning symbol is used to indicate potentially
hazardous situations and conditions which, if not avoided, COULD
result in serious injury or death. Severe property damage COULD
also occur.
Attention- The attention warning symbol is used to indicate
situations and conditions that can cause operator injury
and/or equipment damage.
Other warning symbols may appear along with the Danger and
Caution symbol and are used to specify special hazards. These
warnings describe particular areas where special care and/or
procedures are required in order to prevent serious injury and
possible death.
Electrical warnings- The electrical warning symbol is a lightning bolt
mark enclosed in a triangle. The electrical warning symbol is used
to indicate high voltage locations and conditions may cause serious
injury or death.
Explosion warnings- The explosion warning symbol is an
explosion mark enclosed in a tri- angle. The explosion
warning symbol is used to indicate locations and conditions
where molten, exploding parts may cause serious injury or
death if the proper precautions are not observed.
To Next Page
Loading...
Need help?
General
