UPS + Isolation Transformer User Manual
© 2020 AMETEK Electronic Systems Protection | Technical Support: 1-800-645-9721 | surgex.com 3
1.0 SAFETY INSTRUCTIONS
I
M
P
OR
T
AN
T
- SAVE THESE
I
N
S
T
RUC
T
I
ON
S
TH
I
S
MANUAL CON
T
A
I
N
S
I
M
P
OR
T
AN
T
SAFETY
I
N
S
T
RUC
T
I
ON
S
.
KEEP
TH
I
S
MANUAL
HANDY FOR REFERENCE
.
CAU
TIO
N
A battery can present a risk of electrical shock. Short-circuit currents can be
extremely
high and can
create severe
burns
as
well
as
the risk of fire or explosion from vented
gases. Always observe proper precautions.
When replacing batteries, use the same quantity, rating and type of batteries used by SurgeX.
The batteries used in this UPS are sealed lead-acid and are maintenance free. Proper
disposal of batteries is required. Refer to your local codes for disposal of batteries.
CAU
TIO
N
• This UPS contains voltages which are potentially hazardous. All repairs
should be
performed
by qualified
service personnel.
• To
reduce
the risk of fire,
connect
only to a circuit provided with 20
am
peres
maximum branch circuit over-current protection in accordance with the National
Electric Code, ANSI/NFPA 70.
• The UPS has its own internal energy source (battery). The output receptacles of the
UPS may be live even when the UPS is not connected to an AC Supply.