Ametek TESEO CDN HSS-2 - Technical Specifications; CDN HSS-2 Electrical Specifications; CDN HSS-2 Mechanical Specifications

14
CDN HSS-2
6. TECHNICAL SPECIFICATION
6.1. Technical specifications of CDN HSS-2
Circuitdiagram: accordingtoFig.11ofIEC61000-4-5Edition3
Max.surgetestvoltage: 2kV*(1.2/50µspulseasperIEC/EN61000-4-5)
Max.surgetestcurrent: 50A(8/20µspulseasperIEC/EN61000-4-5)
Couplingmode: Commonmodeto1,2or4pairswithrespectto 
  CDNchassis
Couplingelements: 40Ωinserieswithcapacitivecouplingelements
Max.residualtestvoltageatAEport: 65V(at2kVsurgetestvoltage)
Surgeinputconnector: HVconnectorfemale(FischerD103A023)
Applications: ISDN,10/100BaseT,1000BaseTetc.,switchableper
jumper, PoE applicable
Cabletype: 8wireunshieldedtwistedpair(UTP)
Insertionloss,typical: 9dBat100MHz
Othertypicalnetworklimits: TIA-568-ACategory5-TSB95Link
Max.operatingspeed: 1000BaseT
Max.operatingvoltage: 100VDCbetweenpairs
Max.operatingcurrent: 1A(ratedforPoweroverEthernet)
Connection(EUTport,AEport): RJ45female
*) +10 % tolerance allowed
6.2. Mechanical specifications of CDN HSS-2
Size(WxHxD)inmm: 200x200x470
Weight: approx.15kg    
Figure 15: Typical current waveform