Amewi ARROW 5 - How to Operate the Boat

14
amewi.com
Picture 11
2. Check if the tail rubber is perpendicular to the boat, if the angle is not vertical
slightly, use the provided hexagon wrench to release the screw for holding rod
(Picture 11), then re-calibrate and fix the screw.
3. If boat slightly yaw during sailing, it can be adjusted by using the trimming button.
Notice：1. Keep away from propeller during calibration to avoid injury or damage.
2. The floating waste in water may easy to damage the steering gear or propeller
when the boat sailing at high speed. Please replace the damaged steering gear
or propeller in time.
How to operate the boat:
To move forward
To move backwards
To turn left
1. Pull back the throttle trigger of the transmitter.
2. Push forward the throttle trigger of the transmitter.
3. Pull back the throttle trigger of the transmitter and move the steering knob
counterclockwise
screw for holding rod