Need help?Do you have a question about the AMG COMMANDER and is the answer not in the manual?
The button used to turn the Commander device on or off.
The button to initiate the shot timing sequence.
Shows the time for the currently recorded shot.
Displays the time of the first shot in a string.
Indicates the time difference between consecutive shots.
Shows the current shot number and total shots recorded.
Buttons used for navigating menus and controlling the timer.
The component that detects the sound of shots.
Emits audible beeps for start signals and timing.
The removable cover for accessing the batteries.
The mechanism used to secure the battery compartment door.
Instructions for powering the Commander device on and off.
How to initiate the shot timing sequence and what to expect.
Methods for navigating and viewing recorded shot data.
Predefined configurations for sensitivity, delay, and beep volume.
Adjusting the device's sensitivity for detecting shots accurately.
Configuring instant or delayed start with fixed or random delays.
Setting up to three audible beeps to measure performance against.
Setting the device's insensitivity period after a shot to prevent double counts.
Adjusting the loudness of the audible beeps for different training environments.
Connecting the timer to smartphones for shot time download and analysis.
Displaying timer identification information for Bluetooth module.
Restoring the device settings to their original factory configurations.
Accessing 'set and forget' settings not normally changed often.
Step-by-step guide for opening the compartment and replacing batteries.
Statements regarding FCC and Industry Canada compliance for device operation.
To Next Page
General