AMGO A435-P - Installation Requirement

2
II. INSTALLATION REQUIREMENT
A. TOOLS REQUIRED
P
Tape Measure（7.5m ） P Carpenter’s Chalk
P
Hammer P Screw Sets
P
Level Bar P Pliers
P
English Spanner (12") P Lock Wrench
P
Wrench set：(12
＃
、13
＃
、14
＃
、15
＃
、17
＃
、19
#
24
＃
、30
#
)
B. SPECIFICATIONS OF CONCRETE (See Fig. 3)
Specifications of concrete must be adhered to the specification as following.
Failure to do so may result in lift and/or vehicle falling.
1. Concrete must be thickness 100mm minimum and without reinforcing steel bars, and
must be dried completely before the installation.
P Socket Head Wrench：(3
＃
、5
＃
、6
＃
、8
＃
)
Fig.2