Why won't the Amica EGSP 14696 E Dishwasher programme start?
If the Amica Dishwasher programme won't start, ensure the plug is properly inserted into the wall outlet, check the fuses in the electrical system, and verify that the water supply valve is open. Also, make sure that the door is closed, the dishwasher is turned off, and the water supply filter and dishwasher filters are clean.
How to prevent food residue on dishes in Amica EGSP 14696 E Dishwasher?
If food residue remains on the dishes in your Amica Dishwasher, it might be due to several reasons: Dishes may be improperly loaded, baskets may be overloaded, or the dishes may be touching. Also, check if you're using enough detergent or if the selected washing programme is too gentle. Ensure the spray arm isn't clogged, and that the filters and drain pump are clean and properly fitted.
What to do if there is water in Amica EGSP 14696 E Dishwasher after cycle?
If there is water in the Amica Dishwasher when the programme completes, it could be due to a clogged or kinked water drain hose, clogged filters, or the programme not yet being completed.
Why does my Amica Dishwasher keep stopping mid-cycle?
The Amica Dishwasher might stop during a washing program due to a power failure, no water supply, or because the program is paused.
Why won't the lights turn off on my Amica EGSP 14696 E Dishwasher after washing?
If the indicators on your Amica Dishwasher do not go out after washing, it could be because you did not press the On/Off button. It may also be related to residue detergent in the dispenser or detergent being added to a wet dispenser.
Why are dishes not drying in my Amica EGSP 14696 E Dishwasher?
If the dishes won't dry in your Amica Dishwasher, it may be because a program that does not include a drying phase has been selected. Also, check if the special salt dosage is set too low, or if the dishes are removed too soon from the dishwasher.
Why are there white spots on dishes from Amica EGSP 14696 E?
If white spots or streaks appear on the dishes in your Amica Dishwasher, it could be due to using a very small amount of detergent or a low dose of rinse aid. It may also be caused by not using special salt despite high water hardness, having a water softening system at a very low setting, or the special salt dispenser lid not being closed properly.
Why is my Amica EGSP 14696 E making clinking noises?
If you hear clinking noises inside the Amica Dishwasher, it is likely that the dishes are arranged incorrectly or the spray arm is hitting the dishes.
Why is my Amica EGSP 14696 E Dishwasher causing corrosion on cookware?
If traces of corrosion appear on cookware in your Amica Dishwasher, it could be due to the low quality of the cookware's stainless steel, a lot of salt in the rinse water, the special salt dispenser lid not being closed properly, too much special salt spilled when filling the dispenser, or the appliance being improperly grounded.
General| Brand | Amica |
|---|---|
| Model | EGSP 14696 E |
| Category | Dishwasher |
| Language | English |
To Next Page