EasyManua.ls Logo

Amica EGSP 14895 E - User Manual

Amica EGSP 14895 E
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DISHWASHER
Please carefully read these Operating Instructions before using the appliance!
OPERATING INSTRUCTIONS EN
EGSP 14895 E

Questions and Answers

  • E
    Erica MedinaAug 16, 2025
    How to fix Amica EGSP 14895 E Dishwasher that won't start?
    • G
      Gregory PhillipsAug 16, 2025
      If your Amica dishwasher won't start, ensure the plug is correctly inserted into the wall outlet and that the fuses in your electrical system are working. Also, check that the water supply valve is open and the dishwasher door is fully closed. Make sure the dishwasher is turned on/off using the On/Off button and that the water supply filter and dishwasher filters are clean.
  • M
    Michael SmithAug 18, 2025
    Why does my Amica Dishwasher leave food residue on dishes?
    • W
      Wendy MccoyAug 18, 2025
      If your Amica dishwasher has food residue on the dishes after a cycle, this may be because the dishes are not loaded properly, preventing water from reaching all surfaces. Other potential causes: * The basket is overloaded. * The dishes are touching each other. * Not enough detergent was added. * The selected washing program is too gentle. * The spray arm is clogged with food residue. * The filters are clogged or improperly fitted. * The drain pump is clogged.
  • G
    Gregory GarciaAug 21, 2025
    What to do if there is water in my Amica Dishwasher after the cycle?
    • C
      Craig HarrisAug 21, 2025
      If your Amica dishwasher has water remaining after the program finishes, the water drain hose might be clogged or kinked. Alternatively, the filters could be clogged, or the program might not have fully completed.
  • H
    hollowaybrittanyAug 25, 2025
    Why does my Amica EGSP 14895 E leave white spots on dishes?
    • D
      Daniel YangAug 25, 2025
      If you notice white spots or streaks on your dishes after using your Amica dishwasher, it could be due to several reasons: * Not enough detergent was added. * The rinse aid dosage is too low. * You are not using special salt, despite hard water. * The water softening system is set too low. * The special salt dispenser lid isn't closed properly.
  • M
    Michael MeyerAug 28, 2025
    Why does my Amica Dishwasher stop during a washing program?
    • C
      Cole AndersonAug 28, 2025
      If your Amica dishwasher stops mid-cycle, it could be due to a power failure, an interruption in the water supply, or because the program was intentionally paused.
  • R
    Rick CunninghamAug 30, 2025
    Why are my dishes not drying in my Amica Dishwasher?
    • C
      Cynthia JonesAug 30, 2025
      If your Amica dishwasher isn't drying dishes properly, it might be because you've selected a program that doesn't include a drying phase. Also, the special salt dosage might be set too low, or you might be removing the dishes too soon after the cycle finishes.
  • S
    Stacy WaltersSep 3, 2025
    Why don't the indicators go out after washing in my Amica EGSP 14895 E?
    • C
      Christopher JenkinsSep 3, 2025
      If the indicators on your Amica dishwasher remain lit after washing, it could be because you didn't press the On/Off button. It could also be due to residue detergent in the dispenser or detergent being added to a wet dispenser.
  • J
    Jenny SmithSep 5, 2025
    Why do I hear clinking noises in my Amica EGSP 14895 E?
    • C
      Carolyn BrownSep 5, 2025
      If you hear clinking noises inside your Amica dishwasher, it's likely that the dishes are arranged incorrectly, or the spray arm is hitting the dishes.
  • J
    Jeffrey VillegasSep 8, 2025
    Why is there corrosion on cookware after using my Amica EGSP 14895 E Dishwasher?
    • E
      Elizabeth ChristianSep 9, 2025
      If you see traces of corrosion on your cookware after using your Amica dishwasher, it could be due to the low quality of the cookware's stainless steel. Other possible causes include too much salt in the rinse water, the special salt dispenser lid not being closed properly, too much special salt spilled when filling the dispenser, or the appliance being improperly grounded.
  • J
    Jason McdowellSep 12, 2025
    What to do if the program indicator light is flashing on my Amica Dishwasher?
    • D
      dbensonSep 12, 2025
      If one of the program indicators lights up and the Start/Pause indicator flashes on your Amica dishwasher, make sure that the door is closed.

Amica EGSP 14895 E Specifications

General IconGeneral
Appliance placementFreestanding
Control panel colourBlack
Door colourStainless steel
Built-in displayYes
Inlet hose length1.5 m
Noise emission classC
Noise level47 dB
Half-loadYes
AquaStop functionYes
Delayed start timerYes
Energy efficiency classE
Energy consumption per 100 cycles95 kWh
Water consumption per cycle9.5 L
Power consumption (off)0.5 W
Width598 mm
Drying ClassA
Washing ClassA
Voltage230 V
Frequency50 Hz
Number of place settings14
Drying systemCondensation
Delayed start24 h
Energy consumption per cycle0.95 kWh
Depth50 cm

Related product manuals