Amica ZIG 645C - CONTROL PANEL AND INITIAL SETUP; Control Panel Functions and Indicators; First Use Preparation Steps

14
CONTROL PANEL
1. Program indicator light: when you select a washing programme, the corresponding light will display.
2 Program select button/Child lock button: Press the button to select the program.
The „child lock“ will be available when you press the button 3 seconds ,and „LO“ ashes 6 times
on digital displays.
3 Salt and Rinse Aid Indicator Light: To come on when the softener or dispenser needs to be relled.
4 Digital display: To display the running time remain, malfunction codes and delay time.
5 Delay time: This option will allow you to delay the start time of any wash cycle for up to
24 hours (depending on model). Select the delay start time you want by pressing the DELAY
pad. Multiple pressing will increase the delay hours.
6 Power switch: To turn on/o the power supply.
7 After select the desire program, close the door, the dishwasher in function status.
Before using the appliance, verify that the data given on the rating plate
matches that of local power outlets.
Remove all packing materials from inside of the appliance.
Prepare special salt (water softener).
Add 2 kg special salt (intended for dishwashers) to the salt dispenser and ll it
with water to the brim.
Pour into the rinse aid dispenser.
1
Before rst use
1 2
3 4 5
6