Amino Remote Control User Manual

3. Remote Modes
The remote control operates in one of two modes, either STB mode or TV mode.
The mode is selected by pressing the TV or STB mode-select button at the top of
the remote. When pressed, the TV or STB mode–select buttons illuminate for 1 second to
indicate that the mode has been set.
When any function button on the remote is pressed, the TV or STB button will light to indicate
that a command is being transmitted in that mode.
If a button has no valid function in that mode, neither the TV nor STB mode buttons will light.
4. TV Control
In TV mode, the remote can control the following TV functions:
Note 1. All TVs will power off with this
button. Some TVs will switch on when the
power button is next pressed and other TVs
will only power on when a channel button or
channel +/- is pressed.
Note 2. Some TV’s will cycle through
available AV inputs using the Channel
+/- button. Other TVs only use the AV button
to access the AV inputs.
Note 3. Not all TVs support this function.
Note 4. Some TVs use the menu, navigation
and OK buttons to access
settings that are not commonly changed
(Closed-caption display, for example) Not all
TVs support this function.
Page 3

Amino Remote Control Specifications

General

Brand	Amino
Model	Remote Control
Category	Remote Control
Language	English