Need help?Do you have a question about the AML Oceanographic AML-3 LGR and is the answer not in the manual?
Overview of the AML-3 LGR instrument's capabilities, customization options, and typical arrangements.
Details on connecting and communicating with the AML-3 LGR via WiFi and USB-C.
Procedures and important notes for charging the instrument's internal battery.
Information on connecting external sensors to the AML-3 instrument's endcap.
Details on the on-board GPS + GLONASS functionality for 500m AML-3 LGR models.
Explanation of the multi-colour indicator LED patterns and their meanings.
Information on the pressure limits of the instrument and installed sensors.
Steps to connect and begin using the Sailfish software with the instrument.
The typical workflow for conducting a data profile with the instrument.
Procedure for setting up an external GPS listener to send location data.
Settings for controlling how frequently measurements are logged by the instrument.
Settings that control which parameters are included in the data stream and log file.
Settings for synchronizing the instrument's time and location data.
Settings for managing the instrument's power consumption and sleep modes.
Viewing storage capacity and managing stored files on the instrument.
Procedures for checking and installing firmware updates for the instrument.
Using the command window for sending advanced commands to the instrument.
Feature to improve GPS lock times using downloaded satellite data.
Contact information for requesting RMA or technical support.
Contact information for general sales inquiries.
Commands for controlling sampling parameters, modes, and triggers.
Commands for configuring and managing data monitoring sessions.
Commands for setting log file formats and monitor output parameters.
Commands for controlling the UV antifouling system's duty cycle.
Commands for checking and controlling the instrument's data logging status.
Commands to display help information and configuration options.
Commands for setting serial communication parameters like baud rate.
Commands for displaying sensor information and performing raw talk sessions.
Commands for system operations like setting date/time and memory checks.
Commands for managing GPS database dumps and offline assist features.
Commands for controlling instrument power states like power off and hibernate.
Description of the column-based data output format with meta-data retrieval.
Description of the proprietary AMLx self-describing data format.
Details on calculating salinity based on conductivity, temperature, and pressure.
Details on calculating salinity using sound velocity, temperature, and pressure.
Details on calculating density based on conductivity, temperature, and pressure.
Details on calculating density using sound velocity, temperature, and pressure.
Details on calculating sound velocity based on conductivity, temperature, and pressure.
Details on calculating depth from pressure readings.
Information on the X2Change sensors, their ports, and compatibility.
Steps for safely removing X2Change sensors from the instrument.
Step-by-step guide for installing X2Change sensors into the instrument.
Importance of using seals and plugs for empty sensor ports and connectors.
General| Brand | AML Oceanographic |
|---|---|
| Model | AML-3 LGR |
| Category | Marine Equipment |
| Language | English |
To Next Page
