Need help?Do you have a question about the AML Oceanographic AML-6 RT and is the answer not in the manual?
Describes the two connectors on AML-6 RT instruments: MCBH and USB-C.
Compares serial and USB-C connections, highlighting unique features and recommended uses.
Outlines the steps for first-time users to familiarize themselves with AML-6 RT instrument operation.
Guides users through connecting and configuring the instrument using the Sailfish software.
Explains how to connect and communicate with the instrument via a serial terminal.
Instructions on how to view live data streams from the instrument using the monitor command.
Explains how data logging is distinct from monitoring and its various activation methods.
Explains configuring sampling modes: Single and Burst, including parameters like sample rate and interval.
Details configuration options for monitor behavior, including robust and auto monitor modes.
Explains how to add calculated parameters to log files and monitor output.
Explains how to configure data logging to start automatically or via manual command.
Explains the user-swappable nature of X2Change sensors and their installation.
Provides step-by-step instructions for removing X2Change sensors from the instrument.
Provides step-by-step instructions for installing X2Change sensors into the instrument.
General| Brand | AML Oceanographic |
|---|---|
| Model | AML-6 RT |
| Category | Marine Equipment |
| Language | English |
To Next Page
