AML Oceanographic AML-6 RT - Table of Contents

1 Introduction 6
1.1 Instrument Overview 6
1.2 Internal Battery 9
1.3 Connectors and Cables 9
1.4 Auxiliary Sensors 11
1.5 UV biofouling control 11
1.6 Indicator LED Flash Patterns 11
1.7 Pressure Ratings 12
2 Getting Started 13
2.1 Serial (MCBH) vs USB-C connection - What’s the difference? 13
2.2 Deployment workflow 13
2.3 Getting started with Sailfish (USB-C or Serial Connector) 14
2.4 Getting started with a Serial Terminal 15
2.4.1 Basic Command Line Functionality 16
View information about installed sensors, parameters, and units 16
Streaming live data (MONITORING) 17
Application note on monitor formats 18
Internally Logging Data 18
3 Configuration 20
3.1 Configure with Sailfish 20
3.2 Configure with a terminal 20
3.2.1 Baud Rate 20
3.2.2 Sampling Settings 20
Burst Mode and Single Mode Sampling 20
Burst Averaging 22
Sleep Mode 23
3.2.3 Monitor Modes 24
3.2.4 Derived Parameters 25
AML Oceanographic Ltd. 3/44