User Manual for AML Oceanographic BaseX2
18
LoggingBreakMode=no
DetectionMode=A3
BatteryACoefficient=+3.500000E-01
BatteryBCoefficient=+2.500000E-02
ShutDownVoltage=6.5
WarningVoltage=6.9
PressureOffset=0.00
UsePressureOffset=no
SoundVelocityThreshold=1375.00
DelimterMode=Space
SensorDetectionMode=Once
Traceability=yes
SkipPowerOff=no
AnalogChannels=2
Latitude=48.6570
Longitude=-123.4137
AutoMonitorSeconds=0
FixedPressure=0.0000
UseFixedPressure=no
BiofoulingPwrAlways=no
LedTimeoutSecs=300
DisplayIncrement=no
[Slot 1]
SensorName=SV-C-CT.Xchange SV.X SN 204907 09/22/15
BoardSN=03511
[Slot 3]
SensorName=P-T-TU-DO-UV.Xchange P.X SN 304977 10/23/15
BoardSN=02640
>dir
Support
Troubleshooting
Device fails to connect over wireless:
• Is the device powered?
o Is the connector fully seated?
o Is the attached X•Series instrument charged?
o The amber endcap light will blink when powered, using the patterns on the label.
• Is your computer connected to the ad-hoc network the device generates?
o See which wireless networks are available to your computer. If using SeaCast,
a network called “Data•Xchange” will appear. If not, the SSID with the device’s
serial number included indicates that it is broadcasting.
Connection is spotty, or device wakes up from sleep mode without prompting:
To Next Page
Loading...