3.5.2 If the en gine starts
•
Set the en gine speed le ver (1) to idle (MIN).
•
Al low the en gine to run for 1-2 min utes in or der to warm up.
•
If the choke le ver (3) has been moved to the «CLOSED» po si -
tion to start the en gine, grad u ally move it to the «OPEN» po si -
tion as the en gine warms up.
3.5.3 Stop ping the en gine
•
Set the en gine speed le ver (1) to the «MIN» po si tion.
•
Turn the en gine switch (4) to the «OFF» po si tion.
•
Turn the fuel valve le ver (2) to the «OFF» po si tion.
To stop the en gine in an emer gency, sim ply turn the
en gine switch to the «OFF» po si tion.
To Next Page
Loading...
