3.3 En gine op er a tion
3.3.1 Low oil pro tec tion
The en gine is equipped with low oil pro tec tion:
•
If the en gine oil is too low, the en gine won't start.
•
When the starter han dle (1) is pulled, the con trol light (2)
blinks.In this case
- Check the en gine oil level and top it off, if nec es sary.
•
Re peat the start ing pro cess.
3.3.2 Start the en gine
•
Turn the fu el tap (3) «ON».
•
Set the choke le ver (4) to «CLOSE».
02031000-2 HbmG gnu thci dreV nna mmA 7102/70
3. Ope ra ti on
43
Do not use the choke (4) if the en gine is hot or the out -
door tem per a ture is high. If the en gine does n't start at
op er at ing tem per a ture, close the choke be fore start -
ing.