FIRERAY PRODUCT GUIDE
Page 1
1 About This Manual
1.1 Introduction
The aim of this guide is to offer information on the proper use of infrared (IR) / Optical Beam Smoke
Detectors to protect lives, equipment and property.
The Guide summarise the design requirements, the principles and practical applications for their
incorporation as a component of a Fire Alarm Control Panel
For specific applications, Optical Beam Smoke Detectors can be important links in a well engineered
Fire Alarm Control Panel. Thanks to their own capabilities, Optical Beam Smoke Detectors can
overcome the problems and limitations of point-type smoke detectors
Optical Beam Smoke Detectors are an efficient and economical way of protecting lives, equipment
and property where:
Areas are wide
Ceilings are high
Architecture cosmetic / aesthetic is important
Cost of installation and servicing is low.
1.2 References
PDS220-0004 FIRERAY 2000 Beam Detector Product Data Sheet
PDS220-0005 FIRERAY 50R 100R Beam Detector Product Data Sheet
PDS220-0008 FIRERAY 5000 Beam Detector Product Data Sheet
1.3 Symbols
Note: Configuration considerations
To Next Page
Loading...
