Using the Amped Wireless Utility (XP/2000)
General: The General tab provides information
regarding the current status of your High Power
Adapter. If you are connected to a wireless
network, it will display the connection details as
well as the IP address settings.
Renew IP: Request a new IP address from your
wireless router. Use this feature in the case
where your internet connection stops working
(but you are still connected to the wireless
network).
Windows Zero Config: If your version of Windows has a wireless utility installed, the feature will allow you to
use the Windows wireless utility instead of the Amped Wireless Utility.
To Next Page
Loading...
